X/P - A/M - P2S - X2D Fan Cover Ring
Print Profile(8)
Description
X/P - A/M Toolhead Part Fan Cover & Ring XPTFC - XPTFR - AMTFC
Add Tony to your Bambu — he keeps an eye on your prints better than the AI!
Give your printer a touch of design, fun or a little turbo whistle flair!
Compatible with: X/P Gen 2 (P2S) and A1/ MINI with corresponding profile. **X2D It should fit with P2S profile (i don't have one), if you try share pictures!
*New* (2026-05-28)
Wireless P2S Toolhead Cover, check it out!
- P2S THC., Freshly released, compatible with these covers, and available without a hole. More designs coming if there’s enough interest.
Profile for A1 and MINI will be uploaded gradually as well of Gen 1 X/P (X1C, P1P, P1S) coming up! Thank you for understanding
The Original Turbo Cover
- designed like a CFM56, tuned like a squirrel on 24V of pure chaos. The Turbo Fan Cover gives your Bambu printer that spooling-up jet whine that says, “Yeah, it’s printing Benchy at Mach 0.9.” Overhangs? Those are just corners taken at full throttle.*
The Ring
- Demonstrate your love. Side effects may include lost fingertip, standard airflow, and boosted street cred.
The Flap
- For those who grew up thinking the CD player lid was high-tech aerospace engineering. You know, the one you’d open just to show everyone your cool disc.
The Hex
- Like having a bee’s nest on your toolhead, or just another hex to flex on your favorite printer setup.
The Bambu Stripe
- Adding the 10,000th Bambu logo to your printer. Performance gains are obvious. Or at least, that’s the story we’re sticking with.
The Tony Angry Frog
- No comment. Saying more would be a safety risk.
*Sound varies depending on the printer model and airflow.
Those blower types run on a floating bearing, so slight offset differences can happen. Otherwise, make sure your print has no defects. I printed and tested every unit, and I have to push a bit on the cover to get rubbing.
If you’re contact, it could be due to blower offset variation or print/ filament tolerances, Try adjusting for blower offset compensation or checking for dimensional differences in your print that could be causing the issue. Light sanding or slightly reducing the Z scale can also help.
Please note: that the sound effect does not enhance cooling performance.
Sound levels have been measured to ensure they are not excessive to the ear. 🙂
Installation Instructions
- Place the cover aligned onto the fan hole.
- Tuck one edge in and work it around with your finger. It will flex slightly and snap into place.
- Done! Press start, enjoy that sweet whistle, or watch Tony the Frog doing his job.
A1 and MINI is possible to install in place, but there 3 Screws, one each side and one in the back hidden, easier when the blower is removed.
Enjoy a safer printer with a playful twist or the sound of a tiny turbo jet!
v1.0 Specifications (Hex) (P2S)
Material: Use PETG for strength and better layer adhesion on the retaining ring to prevent PLA de-layering issues in the fan. Otherwise use at your own risk.
Printer Settings:
- Profile: Standard
- Layer Height: 0.12 mm
- Mode: CERTIFIED LUDICROUS
- Infill: 60%
- Walls: 6
- Bottom Layers: 3
- Top Layers: 5
Printing Details:
- Supports: Not required
- Print Time: 16m54s
- Filament Usage: 0.06 oz
- Estimated Cost: ~$0.05 (based on a $26 PETG spool)
Boost Me (for free)
🚀 Boost Your Project! 🚀 If you love what I'm working on, hit the Boost button! Your support helps me continue to create, improve, and share even more exciting designs. Thank you for being part of this journey!
Enjoy your printing journey, and remember—keep your fingers away from the poop chute, she's angry!
"I’ll be sure to keep you updated with any future developments. If you come across any issues or need assistance, don’t hesitate to reach out—I’m here to help!"
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Current ver.1.0_06/03/2026
© 2026 C59 Design Lab. All rights reserved.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (284)