中文
紧凑版Zero3盒子，覆盖原厂扩展板。
使用5V 3007风扇；
两片散热片，尺寸为19x14x6mm；
M3x6螺丝4~6颗用于风扇和扩展板固定；
M3x20螺丝4颗用于固定Zero3本体和底板。
天线暂时无处安放，原装天线肯定是塞不进盒子里了。
使用的solidworks版本为2021。

English
A compact case for OrangePi Zero3 and its hub.
Required components:
A 3007 5V fan;
Two 19x14x6mm heat sink, you may edit the design for the size of your heat sink;
Four or Six M3x6 screws to mount the fan and the hub, depends on the number of screws used to mount the fan;
Four M3x20mm screws to mount the OrangePi Zero3 and the bottom of the case.
Currently I haven't design where to place the antenna. The antenna shipped with zero3 can' fit inside the case.
Designed with SolidWorks 2021.

VoronDesign

No

0.2mm