这是一个桌面好物，解决了我们桌面杂乱的烦恼。因为办公桌不是很大，所以总是在制作东西时被放置的水杯和抽纸所影响。也偶尔有过不小心打翻水杯的烦恼，于是我想到了在桌子边缘的空处做一个能把这两样物品都放下的架子。

This is a great desktop item that solves our problem of messy desktops. Because the office desk is not very large, it is always affected by the water cups and paper cups placed during the making of things. I also occasionally have the trouble of accidentally tipping over a water glass, so I thought of making a shelf on the edge of the table that can hold both items.

由于我的桌面厚度是13mm，放置的打印配置也是根据这个尺寸制作的，所以我提供了stl文件，有需要根据自己桌面厚度进行调整的话可以下载到建模软件中更改，也可以给我留言所需要的尺寸，我也可以更改后上传不同的配置。

Due to the thickness of my desktop being 13mm and the printing configuration being made according to this size, I have provided an stl file. If you need to adjust it according to your desktop thickness, you can download it to the modeling software to make changes. You can also leave me a message about the required size, and I can upload different configurations after making the changes.

最后，整个模型的尺寸较大，所以我使用了Bambu Studio软件中剪切功能里的燕尾榫这样以便于打印和组装。如果有其他尺寸的需要也可以自行更改为合适的切割尺寸去打印。

Finally, the size of the entire model is relatively large, so I used the dovetail tenon in the cutting function of Bambu Studio software for easy printing and assembly. If there is a need for other sizes, you can also change them to the appropriate cutting size for printing.