Interstellar Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #000000 PLA BambuLab Matte Charcoal  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #8bd5ee PLA BambuLab Matte Ice Blue  Transmission Distance: 3.5
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #9 (0.8mm) swap to Blue Gray
    At layer #14 (1.2mm) swap to Ice Blue

Border Only Colors from here until the end.
    At layer #23 (1.92mm) swap to Ivory White for the rest.