For the pieces to fit, you need to set Horizontal Expansion
(cura) or XY Size Compensation
(prusa) to at least -0.05
[mm]. If your printer is not calibrated very well, try around -0.1
[mm].
Note: some pieces might require supports (Bracket and Stud)
Name | Color | Quantity |
---|---|---|
1x1 stud | Silver (Sunlu Silk Silver PLA) | 1x |
1x2 tile | Black (Sunlu Silk Black PLA) | 1x |
1x3 plate | Black (Sunlu Silk Black PLA) | 2x |
1x3 plate | Green (Prusament Galaxy Green PLA) | 1x |
Bracket | Grey (Sunlu Gray PLA) | 1x |