pebble手表一代屏幕排线接触不良修复垫片（pebble watch repair screen ） by greslver

Add the first print profile to earn points

Boost

Released

模型用途： 用于pebble手表一代修复屏幕花屏接触不良问题，如果你的屏幕通过垫东西、按压，可以恢复的话，可以尝试用此方式修复。
使用方法：拆开手表后盖，在后盖的压屏幕的凸起位置套上这个小零件，然后安装起来。
打印建议：建议使用tpu材质打印，不容易损伤排线，我用的硬度是95A，如果选用更软一些的硬度可能会有更好的效果。打印tpu材质请用近程挤出机的打印机。
Model Purpose: Used for repairing screen mura and contact issues on the first generation Pebble watch. If your screen can be restored by padding or pressing, you may try this method for repair. Usage: After opening the back cover of the watch, fit this small part over the bulge that presses against the screen, then reassemble. Printing Recommendations: It is recommended to print using TPU material, which is less likely to damage the flex cable. I used a hardness of 95A, but choosing a softer hardness may yield better results. When printing with TPU material, please use a printer with a direct extruder.