Fish House
Print Profile(1)
Description
Fish House
Glass bottles or canning jars with a maximum diameter of less than 98mm (diameter cannot be less than 76mm) and a height of less than 140mm.
Place crushed jade, crystal lamp ornaments, and volcanic rocks inside (refer to ancient fish farming methods).
There are two types of bases:
1. A base with switch holes.
Parts need to be purchased separately: 12V light strip, switch, quick connect terminals, 12V power supply (the kind with wires at the end). There are some requirements for the size of the light strip and switch; I use the ones below.
https://e.tb.cn/h.SpbKZWwBtXs1hNc?tk=EPUkfTLLc46
https://e.tb.cn/h.SoIlyjqGrWuUfA5?tk=GeORfTLABXD
The light strip is fixed with 2 M3 screws. If it's difficult to tighten, use self-tapping screws.
2. An integrated USB light assembly.
An opening is reserved at the bottom for the USB cable to pass through (light diameter must not exceed 75mm).
Note:
For glass bottles, do not print the handle. (Not compatible)
For canning jars, it fits the one with a diameter of about 80mm.
Mainly for easy handling; it can also be not printed.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)