Hi y'all! I'm going with a teal theme for my P1S accents, so I wanted to make a cute door handle. I found a free svg file of a hibiscus flower on Google, colored it, and spent hours trying to figure out how to manipulate it in Fusion360 and Bambu Studio.

The top half of the model (the flower) is 1.6mm of full color and 3.4mm of all white, for a total depth of 5.0mm. I attached the screw half of Whimsii3D's model to the back for easy mounting onto the P1S door - just use the same screws as the factory handle does. (Note: this also works on the X1C, since they have the same doors!) The whole thing is printed face down for a better surface finish, and looks especially nice on the textured PEI plate.

Total dimensions of model (as in the profile): 72.56mm L * 22.62mm W * 65.87mm H

If you want to resize the flower, use the 3mf file. Select the flower parts from the assembly (hiboutline.svg_A and hiboutline.svg_B) and ONLY resize those. If you resize the screw part, it WILL NOT fit on the door.

I used these colors in my pictured model (yellow & white are from the CMYK bundle):

• Bambu PLA Basic “Jade White”
• Bambu PLA Basic “Yellow”
• Elegoo Matte PLA “Teal Green”
• Inland PLA “Silk Silver”