Soldering wire holder by 3Deste

3Deste

Tools>Organizers

Print Profile(4)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.2mm layer, 3 walls, 15% infill

Designer

1.3 h

1 plate

4.9(101)

PETG 0.2mm layer, 3 walls, 15% infill

1.7 h

1 plate

5.0(10)

0.2mm layer, 3 walls, 15% infill

1.7 h

1 plate

4.9(10)

0.2mm layer, 3 walls, 15% infill

1.7 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

322

642

135

1.2 k

800

Released

Description

This is my version of soldring wire holder.

So simple as funcional.

I use it with 250gr spool.

Printed with PLA but every material is ok.

Support not needed, layer high 0.2mm or higher, minimum 3 wall loops, infill 15%.

If you like this model, please, leave a like and publish a picture of your print :)

Alex

Comment & Rating (135)

@Hemanse

printed great, only my 3rd print and the first with a bit of under extrusion? on the middle pillar, not sure what happened, but im guessing its suppose to be solid? :)

The designer has replied

@alexdeste97

thank you for your comment! On the top of the middle pillar there should be a "step", from the picture seems that you printed it with supports :)

@Hemanse

Replying to @alexdeste97 :

That could be it, i am entirely new to 3d printing and only really now getting into working with slicers. I cant remember if i just printed this directly via wifi from Bambu Handy which could be the issue :)

@alexdeste97

Replying to @Hemanse :

no problem! anyhow, if that are supports you could be able to gently remove them with a plier :)

@aristos555

Print Profile

PETG 0.2mm layer, 3 walls, 15% infill

It can easily fit two, which Is exactly what I want to.

@colombo.simone8

Print Profile

0.2mm layer, 3 walls, 15% infill

amazing model

The designer has replied

@alexdeste97

thank you! :)

@starjam

Worked perfectly for me, thank you

(Edited)

The designer has replied

@alexdeste97

you're welcome :)

(Edited)

@OzDruiD

Print Profile

0.2mm layer, 3 walls, 15% infill

great model!

@bryan.cabrera

Print Profile

0.2mm layer, 3 walls, 15% infill

Nice design and easy to print. Just what I was looking for.

@apt3d

Print Profile

0.2mm layer, 3 walls, 15% infill

Love this and just what I was looking for. I had to make a few changes to make it less wide, as I didn't need it to be as wide as it was. Thank you for this make.