m_p_cameron

Extra Stability, 0.16mm layer, 3 walls, 20% infill gyroid

DasLukas

I'm sorry for the failed print. I think I have to think about a better support structure or maybe some adjustments on the design to make it easier to print with different types of filament and printers.

Toys_And_Stuff

Nice design, but feet are fragile to print. I tried with PETG on A1 mini (adaptation from the strengthen profile), but with no success.

Obiclem

Jethsey

Improved Settings 0.16mm layer, 3 walls, 15% infill

Emmo65

I'm sorry for that. For me it printed without issues.
Maybe I can try to improve this model further to make it easier to print. 

i tried to Print it 3 times. Everytime it failed at the same Layer and same Spot.

As other users have already reported, there are issues with the printing of the rocket supports.

first failed print I’ve had on my p1s after 6 months of use. raft didn’t hold the legs properly and failed 3 legs. 

Koomafloo

Wizard

user_3572793927

Had a few fail before the legs joined to the body. Eventually got a successfull print by slowing things down a bit. Unreleated to the profile but also had a  layer shift on the successful run so ended up splitting and glueing the 2 halfs together. Son still loves it. 

SillySnax

tried to print this twice and had issues with the fins dislodging each time

MarvilousCreations

0.12mm layer, 6 walls, 5% infill

cover

20230426_165533_af067c89-a526-4c61-b7e5-c207ab86bed7.webp

plate_1.webp

plate_1.png

Improved the settings for an easier print and a more sturdy rocket.

IMG_1879_12013cce-c0cb-4ceb-806a-4029c3c197c3.webp

IMG_1881_330ec5d1-b2de-4c25-949b-b4c4b33cd787.webp

IMG_1882_782a4376-a13d-46e3-a8af-c0efd1abbcfa.webp

After having some misprints with the original profile, I decided to create my own. The problem was always the same. The feet of the rocket always broke off. To ensure that this did not happen again, I had to add supports and reduce the speed until the feet connected with the rocket body. With the supports, the print profile no longer matches the title of this object, but there was no other way to print the rocket.

IMG_3988_28ca46f0-24e3-40cc-8e58-015b47724cdc.webp

Inspired by the strengthen profile, but A1 mini compatible.My print in PETG was not perfect, but did finish.

For A1 mini, strong brim and support

Designed this model because I didn't find something similiar with this shape for printing without any support

Print Profile(3)

Description

Comment & Rating (29)

License

Related Models

3d Printable Turbojet Engine

Mini Finger Rocket Launcher

Printed Patio Table with Printed Top

Custom drawer/toolbox organizer with/without lid

Comic Rocket Toy printable without support