Print Profile(2)
P1S ABS 0.2mm layer, 2 walls, 15% infill, with support
Designer
50 min
1 plate
A1 Mini, 0.2mm layer, 2 walls, 15% infill
56 min
1 plate
Open in Bambu Studio
Boost
117
225
33
1
324
241
Released
Description
I needed hooks for my glass shower since the suction cup ones keep falling off. I made this specifically for my glass thickness of 9.25mm with a little tolerance for a tight fit. It needs a bit of finishing after print since it has the rounded corners printed with support, but I thought it was worth it for the aesthetic and function.
I also made these matching adhesive command strip hooks:
https://makerworld.com/en/models/395483#profileId-296765
Comment & Rating (33)
All
Print Profile
P1S ABS 0.2mm layer, 2 walls, 15% infill, with support
ASA
1
Reply
Print Profile
P1S ABS 0.2mm layer, 2 walls, 15% infill, with support
Strong
1
Reply
Print Profile
P1S ABS 0.2mm layer, 2 walls, 15% infill, with support
Reduced the size slightly to fit on the A1 mini, but its pretty big to begin with so lots of play.
1
Reply
Boosted
Print Profile
P1S ABS 0.2mm layer, 2 walls, 15% infill, with support
Thing is pretty giant, but turned out great in PETG.
1
Reply
Print Profile
P1S ABS 0.2mm layer, 2 walls, 15% infill, with support
had to scale it up, but it's stable and elegant
1
Reply
Print Profile
P1S ABS 0.2mm layer, 2 walls, 15% infill, with support
Good work
1
Reply
Super design
1
Reply
Print Profile
A1 Mini, 0.2mm layer, 2 walls, 15% infill
large and strong
1
Reply
Print Profile
P1S ABS 0.2mm layer, 2 walls, 15% infill, with support
Strong, fits the glass, and the towels don't fall off!
1
Reply
Print Profile
P1S ABS 0.2mm layer, 2 walls, 15% infill, with support
Niceeeee 10/10
1
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld