A multicolor 3D model of a Kodama as lightbox

You will find each file named by color for an easy setting.

• Import them in Bambulab/Orca as single object with multiple parts.
• Assign each color to the same named part ("wall" is always withe to create a nice bright outline)
• The “Backbox” have no holes, you can provide by yourself in the slicer according to your type of wires.
• Use a PEI Textured plate for an optimal result
• Print White for last

To achieve a nice result be sure to have settings as follow

• first layer flow ratio = 1.05
• wall transitioning threshold angle = 50°
• Infill/wall overlap = 20%
• Avoid crossing walls

Once you have printed the model glue inside the backbox a ledstrip (multicolor or withe) and wire it trough the provided hole… you have your lightbox ready! ^_^

Take a look to my Patreon ----- https://www.patreon.com/Valda3DPrinting