Search models, users, collections, and posts
GIF
GIF
Print Profile(1)
0.16mm layer, 3 walls, 20% infill
Designer
4 h
2 plates
Open in Bambu Studio
Boost
0
0
0
0
5
1
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Description
I have designed this turntable for simplicity and smooth performance. It utilizes a standard 22 mm bearing from an old fidget spinner.
Features
- Easy to print: Optimized geometry; no supports required.
- Smooth operation: 22 mm bearing provides stable, low-friction rotation.
- Cost-effective: Reuses a common fidget-spinner bearing to reduce the bill of materials.
- Versatile: Suitable for display stands, small platforms, and light DIY mechanisms.
Print Notes (recommended)
- Material: PLA or PETG
- Layer height: 0.2 mm
- Perimeters: 2–3
- Infill: 15–25%
- Supports: None
Assembly
Press the 22 mm bearing into the hub until it is seated flush. If the fit is tight, lightly sand the bore; if loose, use a small amount of removable adhesive.
PS. Don't mind the different color,s the filament ran out mid print
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)