I created this stand where I display my Gameboy. Of course you can also put other things on display such as Nintendo games or pictures etc.For lighting I used the LED light from IKEA, to be precise it is the IKEA KAPPLAKE.
After printing, the arm must be screwed to the base plate.To do this you need:
1. M3*12 hexagon base screw
1. RX M3x5.7 thread insert
The threaded insert must be melted into the hole in the arm using a soldering iron.
First we remove the suport from the cable duct.
Then we plug the cable through the shaft and connect it to the LED light.
The LED light is glued into the intended location using the double-sided adhesive tape provided.
I press the cable into the groove with small Knippex pliers.
Now just screw it together and you're done.
Have fun printing and crafting