Floral Easter Bunny Sculpture Deco / Floral rabbit Sclupture with stand / Oster Hase by HpInvent

HpInvent

Household>Decor

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 2 walls, 10% infill

Designer

52 min

1 plate

4.9(84)

Multi-Colored Bunny, 150% scale, By-Object, Fuzzy Skin on base

1.7 h

1 plate

5.0(10)

0.2mm layer, 2 walls, 10% infill

49 min

1 plate

5.0(5)

0.2mm layer, 2 walls, 10% infill

1.4 h

1 plate

5.0(1)

Click to see more

Boost

223

375

107

763

831

Released

Description

I designed a floral Easter Bunny with a stand that you can clip on
Scale to your liking

Don't forget to print his cute little friends and my other models:
https://makerworld.com/en/u/3624704578
There you can finde more cute animals ;)

Happy printing!

Comment & Rating (107)

@theclaw

Boosted

Can you provide your printsettings, because the details are very filigree and i have some strings and the first layers are not perfect? i have a 0.4mm nozzle and reduces the speed for all layers (layer high 0.2mm). i used a silk pla. in the pictures you see my leaves are missing something. :-)

The designer has replied

@HpInvent

Hey, sorry to hear that it didn't print perfect for you. My own print settings are integrated in the PrintProfile I uploaded. I printed on the golden BambuLab textured plate and had no issues at all with bed adhesion. You could maybe check if your Filament is properly dried. Stringing and bad bed ahesion may point to wet Filament.

@theclaw

Boosted

Replying to @HpInvent :

Thanks for the hint. Filament is two days old. But a good hint ist the golden tectured plate. i will try this.

@Hyper

Replying to @theclaw :

Hey, I had similar problems so I changed to 0,16mm and first layer at 30mm/s and most of the problem went away, if you use single color. When I printed the top layer with a different color (3D Jake Red), the problem came back. However, when I switched to Bambu red sparkle the problem went away again. That's why it seems to be a filament problem.

@BenniBiene

Print Profile

Multi-Colored Bunny, 150% scale, By-Object, Fuzzy Skin on base

Schönes Design!

@Coke2709

Print Profile

Multi-Colored Bunny, 150% scale, By-Object, Fuzzy Skin on base

Came out perfect - also the colouring! Thank you!

@3Dipendence

Print Profile

0.2mm layer, 2 walls, 10% infill

Awesome model! Thank you ✌🏻

@Flowster

Print Profile

0.2mm layer, 2 walls, 10% infill

Könnte von den Grundmaßen ein wenig größer sein aber durch den slicer kein Problem.

@NDMstr

Print Profile

0.2mm layer, 2 walls, 10% infill

printed in sparkle petg at 125%. came out great!

@dominikludwig86

Print Profile

0.2mm layer, 2 walls, 10% infill

sieht wirklich top aus

@markiparky

Print Profile

0.2mm layer, 2 walls, 10% infill

Looks good, thanks!

@xXvenzXx

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

Great print! Bambu Lab - PLA Matte Ivory White

(Edited)

@L3onNL

Print Profile

0.2mm layer, 2 walls, 10% infill

printed good, no glue required. just be careful with putting it in the stand that you don’t put to much force on rhe flowers. I almost broke one off. thanks for the model!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.