X1C Tool Head cover support
Copyright Claim
X1C Tool Head cover support
Boost
43
97
62
Print Profile(2)
0.2mm layer, 2 walls, 20% infill
Designer
27 min
1 plate
0.1mm layer, adaptive infill etc.
27 min
1 plate
Boost
43
97
62
1
175
205
Released
Description
This idea comes from Klayton's “Bambu Lab Tool Head Cover Hanger", that should be working very well for the P1P.
I've reversed the hanger for the X1C tool head, so this small plastic piece supports the cover while I'm working inside the head.
Working on the cutter lever is obstructed, but it helps me a lot when I change the different hotends.
My print is in generic PETG, less then 5 grams of plastic and less then 30 minutes of printing time.
I hope to be helpful for somebody!
Comment & Rating (62)
All
Print Profile
0.2mm layer, 2 walls, 20% infill
Printed perfectly & works great at keeping the toolhead off to the left side so you can make repairs.
The designer has replied
0
Reply
Thank you, I’m really happy to hear that my work has been useful 😃
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
Came out good. Nice little helper 😊
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
printed great in PLA-CF
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
works well, good print
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
Good print
0
Reply
Print Profile
0.1mm layer, adaptive infill etc.
👍
1
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
Well done! Thank you!
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
Well done, nice holder.
(Edited)0
Reply
Printed nicely and seems to be useful, thanks for sharing it!
0
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
perfecto
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRemixes (1)
© 2024 MakerWorld