Spirited Away Train Diorama by Balzo98

Balzo98

Art>Sculptures

Print Profile(8)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

All, 0.08mm layer, 2 walls, 15% infill

Designer

6.7 h

1 plate

4.7(11)

all 150%. 0.08mm layer, 2 walls, 15% infill

Designer

11.7 h

1 plate

4.5(2)

Train, 0.08mm layer, 2 walls, 15% infill

Designer

4.2 h

1 plate

5.0(1)

NoFace, 0.08mm layer, 2 walls, 15% infill

Designer

2.5 h

1 plate

Click to see more

Boost

463

632

443

120

Released

Description

Here for you my version of the train scene from Spirited Away, one of my favourite Ghibli film!

In this model it might be a little tricky to remove the supports.

Chihiro neck is very fragile so you have to be very gentle when you remove the support.

The train also has some support that is not that easy to remove.

I added some 1mm thick acrylic glass (from the cheapest ikea frame) for the window glass.

Hope you enjoy!

Comment & Rating (39)

@JasonBlackhurst

OMG how does your printer print out so perfectly and smooth? is it a trick..? if so can you tell me how…? (btw the photos I attached are not one of your designs)

The designer has replied

@Balzo98

For some of my model (like this one) I print with 0.08 layer height. Sometimes I sand it with abrasive paper (in this particular case I didn't did it). The magic happen with the filler primer! I usually do 2 layer of filler primer.

@wallaroo

Replying to @Balzo98 :

hi Andrea! can i ask you what brand/type of filler do you use?

@Balzo98

Replying to @wallaroo :

I use some spray car body filler from my local hardware store!

@user_2400044802

Love this model! I made Chihiro and the faceless man out of clay, I love it so much～～

The designer has replied

@ajbills813

Boosted

Omg this is AMAZING!!

@Balzo98

This is absolutely incredible! Your clay and paint work is amazing! Also the accessories on the train "bar" is perfect (and i should've modeled it).

@user_2400044802

Replying to @Balzo98 :

I matched it with a mirror base, which looks more like a reflection on the sea. Thank you for your model, which gives me more room for creation.

@ajbills813

Boosted

Print Profile

All, 0.08mm layer, 2 walls, 15% infill

No matter what I do, I can not get the train section to print properly. The bars keep coming out destroyed. Supports do nothing. The other 2 pieces print flawlessly. I'm open to receiving feedback and support, and will change my rating if this gets figured out. EDIT: I think my printer was the problem. Reprinted with normal supports and it came out fine. Changed rating to 5 stars.

(Edited)

The designer has replied

@Balzo98

are you using support? Support is needed in the train. The bars are fragile but if you print with support you shouldn’t have any problem. you only have to be careful when you remove the support.

(Edited)

@ajbills813

Boosted

Replying to @Balzo98 :

Yep, attempted with supports. I am happy to re-print and try anything you recommend. I can also chop up the train to isolate just the bars to run multiple tests.

(Edited)

@ajbills813

Boosted

Replying to @Balzo98 :

Hey, so I spent the last 2 weeks trying to get this to print properly. I ended up covering it in normal supports which did the trick. I am starting to suspect that my printer is the problem, so I'd like to apologize, and I'm changing my rating to 5 stars. As a fellow creator, it always eats away at me when I lose a 5 star rating.

(Edited)