Powered by Make My Vase from MakerWorld (makerworld.com/makerlab/makeMyVase)
This planter was made with the vase generator and has a large volume, printed with the A1mini, which allows you to set the x-axis to 16cm. the walls are 4-5 layers thick and are very sturdy, and it is recommended to print in PETG.
0.24mm Draft @BBL A1M, all the material will be 116g.
With other printers, printing at 100% size and using more than 6 layers would be more consumable, probably more than 200g.
这个花盆是用花瓶生成器制作的,体积很大,用 A1mini 打印,可以将 x 轴设置为 16 厘米。壁厚 4-5 层,非常坚固,建议用 PETG 打印。
0.24mm Draft @BBL A1M,所有材料重 116g。
如果是其他打印机,用100%尺寸打印,用6层以上会比较费耗材,可能会超过200g。