I have purchased many cages for the ZV-E1, most of which are made of metal and are very heavy. Most of the time, I do not need to mount too many accessories, so I scanned and made this model. I haven't come up with a better solution for the mounting method yet, and I've set the base plate thickness to 2.5mm.

There are now two solutions: use the traditional 1/4 inch camera screw to secure it, making sure to account for the 2.5mm base plate thickness.

Or, use your camera's quick release plate to secure it, which is my current solution.

If the camera grip feels a bit loose, you can use a bit of double-sided tape to secure it.

I have tested both ABS and PLA materials, and both can be used normally. The number of wall layers and the infill percentage can be increased a bit, no support needed. I recommend using gradient filaments for a very good effect. This version has solved the problem of the battery compartment opening angle being too small.