Search models, users, collections, and posts
Prometheus
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
8.5 h
2 plates
Open in Bambu Studio
Boost
15
19
0
0
19
0
Released
Description
Photo shows it on the side of my X1C.
A two-parted filament painting, be sure to print both parts with following swaps, they will then fit perfectly:
*** BE SURE TO SET SWAPS ON PLATE 2 MANUALLY ***
*** EXPERIMENT WITH THE COLORS ***
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #13 (1.12mm) swap to Dark Blue
At layer #16 (1.36mm) swap to Orange
At layer #27 (2.24mm) swap to Ivory White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)