I made this print as a tribute to one of my favorite manga. Made with HueForge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Red Transmission Distance: 5
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue Gray
At layer #9 (0.8mm) swap to Red
At layer #11 (0.96mm) swap to Savannah Yellow
At layer #12 (1.04mm) swap to Sunrise Orange
At layer #15 (1.28mm) swap to White for the rest.