EIBOS Easdry Desiccant Bucket
Remixed by
Copyright Claim
EIBOS Easdry Desiccant Bucket
Remixed by
Boost
12
21
15
Print Profile(2)
Honeycomb Cover for Silica 0.16mm layer, 5 walls, 35% honeycomb, 25% gyroid infill on bucket
Designer
1.7 h
1 plate
Gyroid Cover Base for Fine Desiccant - 0.16mm layer, 5 walls, 30% infill bucket, 35% infill cover
Designer
1.7 h
1 plate
Open in Bambu Studio
Boost
12
21
15
3
32
41
Released
Description
Model
Light remix of a desiccant bucket from printables. Configurable infill.
Print and Assembly Notes:
- To edit the infill type on the cover click Process Objects
- Right click on “Cover Base” part and click “Edit Parameters”
- Then click on “Infill Density” for Cover Base row, and edit to your desired outcome. Gyroid or Honeycomb look best, you may need to experiment depending on the size of your desiccant.
Print Profile Notes:
Nozzle: Suggest 0.4mm nozzle for precision fit
Wall Loops: 3 wall loops on 0.4mm nozzle, 0.6mm nozzle not recommended due to decreased layer adhesion.
Layer Height: Suggest 0.16 or 0.20mm to maximize strength (0.16mm default)
Infill: 38% honeycomb, suggest 30-40% infill either gyroid or honeycomb
Brim: None on textured build plate. Consider brim for smooth PEI plate.
Material: PETG or ABS (NO PLA, PLA is not safe for filament dryer)
Color: Any
Print Orientation: Print vertically as seen in .3mf file.
Supports: None
3d Printers: Should be printable on any printer.
Filament amount required: 22.93g total across 2 parts.
Comment & Rating (15)
All
Boosted
Print Profile
Honeycomb Cover for Silica 0.16mm layer, 5 walls, 35% honeycomb, 25% gyroid infill on bucket
fits perfectly
0
Reply
Print Profile
Honeycomb Cover for Silica 0.16mm layer, 5 walls, 35% honeycomb, 25% gyroid infill on bucket
Printed great and fits into dry box well.
0
Reply
Boosted
Print Profile
Honeycomb Cover for Silica 0.16mm layer, 5 walls, 35% honeycomb, 25% gyroid infill on bucket
I had a little bit if warping but probably a problem on my end! the model works perfectly and I love the design!
0
Reply
Print Profile
Honeycomb Cover for Silica 0.16mm layer, 5 walls, 35% honeycomb, 25% gyroid infill on bucket
Printed great in PolyLite PETG. Lid was a bit tight, but that worked itself out by putting it in and taking it out a couple of times.
0
Reply
Print Profile
Honeycomb Cover for Silica 0.16mm layer, 5 walls, 35% honeycomb, 25% gyroid infill on bucket
Great for the lower silica space in the Easdry dryer.
0
Reply
Print Profile
Honeycomb Cover for Silica 0.16mm layer, 5 walls, 35% honeycomb, 25% gyroid infill on bucket
excellent, except for the wet filament I used ;-)
0
Reply
Print Profile
Gyroid Cover Base for Fine Desiccant - 0.16mm layer, 5 walls, 30% infill bucket, 35% infill cover
0
Reply
Boosted
Thanks what i was looking for
0
Reply
Print Profile
Honeycomb Cover for Silica 0.16mm layer, 5 walls, 35% honeycomb, 25% gyroid infill on bucket
Printed perfectly in petg
0
Reply
Print Profile
Honeycomb Cover for Silica 0.16mm layer, 5 walls, 35% honeycomb, 25% gyroid infill on bucket
0
Reply
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld