Light remix of a desiccant bucket from printables. Configurable infill.
Print and Assembly Notes:
Print Profile Notes:
Nozzle: Suggest 0.4mm nozzle for precision fit
Wall Loops: 3 wall loops on 0.4mm nozzle, 0.6mm nozzle not recommended due to decreased layer adhesion.
Layer Height: Suggest 0.16 or 0.20mm to maximize strength (0.16mm default)
Infill: 38% honeycomb, suggest 30-40% infill either gyroid or honeycomb
Brim: None on textured build plate. Consider brim for smooth PEI plate.
Material: PETG or ABS (NO PLA, PLA is not safe for filament dryer)
Color: Any
Print Orientation: Print vertically as seen in .3mf file.
Supports: None
3d Printers: Should be printable on any printer.
Filament amount required: 22.93g total across 2 parts.