Use this model to put your scraper in an accessible place.
这个模型用来在比较便捷的地方收纳铲刀
There are three kinds of model for each printer type
one is with my logo ,another one need put your logo on it,the last one has no personal logo
每种打印机都有三种模型,一种有我的logo,一种提供了放置你的logo的空间,最后一种没有logo
stick some metal part on the model to hold the scraper,the size of it is adjustable, so just modify it to fit your project.
为了铲刀不会掉出来,需要一些能够吸的住的金属片,当前模型的开槽是用来放入两个"直径19mm 厚度1.6mm的比较常见的圆形金属片"的
可以在切片软件里选中负零件,调整大小位置或形状
slide the bottom part into main part,then put them on the screen
把底部的零件从右侧滑入固定,将整体套上屏幕即可