Sewing Box

This is a fully printed sewing box, similar to the classic wooden version.

All you need is glue (and perhaps a little tape for support) to assemble the box.

The Box i printed was completly done with the 0.6 nozzle.

Used Filament: Sunlu Meta White, Yellow and Taro Purple and Overture Rainbow Red/Orange.

Assembly is simple:

Once everything has been printed, first glue the two bottom parts together, then attach the four feet. The handle can be glued together in advance before it is mounted.

Once the base, handle, and feet are mounted, the lower joints can be mounted. The pins are inserted from the outside and glued in place from the inside with the pin cover.

Continue working your way up to the top. Mount the lid, and you're done.