Hello, I would like to introduce you to my L-EGO fridge magnets or other appliances.In the profile, there are added negative parts in the shape of magnets that I used (8x2 mm), thanks to which there will be a hole for inserting the magnet.In the object tab, you can change the size of the negative part according to your magnet. Alternatively, delete my object and add, for example, a cuboid or a cube.

I have two versions.

1. The version that has holes from the bottom, in which case I recommend giving the exact size of the magnet and pounding it with a hammer, or 0.1 mm larger and sticking it with glue.

2. The version that allows for embedding the magnet inside the Brick. In this case, the pause in the profile is set at a height of 2.2 mm (my magnet has dimensions of 8x2 mm). In this case, I recommend using a larger tolerance, I myself used an increase in the opening by 0.2 mm in diameter. Since they will be closed, there is no risk of them falling out and there is no need for glue.

Just keep in mind that in this case the magnets have less power.

No need to use supports.