Universal Storage System - For SKADIS

Copyright Claim

Universal Storage System - For SKADIS

Boost
135
268
25

Print Profile(4)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

3, 4A, 4B - Drawers - 0.2mm layer, 2 walls, 15% infill
3, 4A, 4B - Drawers - 0.2mm layer, 2 walls, 15% infill
Designer
13.7 h
3 plates
4.9(8)

5, 6A. 6B - Pull-Out Bins - 0.2mm layer, 2 walls, 15% infill
5, 6A. 6B - Pull-Out Bins - 0.2mm layer, 2 walls, 15% infill
Designer
12.8 h
3 plates
4.4(5)

7, 8 - Shelves - 0.2mm layer, 2 walls, 15% infill
7, 8 - Shelves - 0.2mm layer, 2 walls, 15% infill
Designer
4.9 h
2 plates
5.0(3)

1, 2 - Fixed Bins - 0.2mm layer, 2 walls, 15% infill
1, 2 - Fixed Bins - 0.2mm layer, 2 walls, 15% infill
Designer
5.8 h
2 plates
5.0(3)

Boost
135
268
25
1
259
152
Released

Description

The Universal Storage System for SKADIS features fixed bins, pull-out bins, drawers and shelves. All the pieces can be used as single organizers or in a system as they will all fit around each other.

 

Features :

  • Uses the Universal Mounts, other designs in this collection use the same mount
    • SKADIS, Wall Mounted, Honeycomb and Multiboard are in the works
  • Dimensions made to perfectly align with the SKADIS Board
  • Take the components you need and arrange them however you desire, they will always fit with one another

 

Here is the list of the currently available designs :

  • #1 Single Fixed Bin
  • #2 Double Fixed Bin
  • #3 Single Drawer
  • #4A Double Drawer
  • #4B Double Drawer
  • #5 Single Pull-Out Bin
  • #6A Double Pull-Out Bin
  • #6B Double Pull-Out Bin
  • #7 Single Shelf
  • #8 Double Shelf

 

Printing tips :

  • Print with a regular 0,20mm profile, no brim, no support needed
  • Print the SKADIS universal mount with the regular 0,20mm profile with 4 walls instead of 2

No assembly needed, simply slide the SKADIS Universal Mount into the SKADIS board and instal your chosen organizer

Comment & Rating (25)

Please fill in your opinion
(0/5000)

Print Profile
1, 2 - Fixed Bins - 0.2mm layer, 2 walls, 15% infill
printed nearly all variations. love this set for Skadis
The designer has replied
1
Reply
thanks, I'm glad you like it!
0
Reply
Print Profile
7, 8 - Shelves - 0.2mm layer, 2 walls, 15% infill
Das Universal Storage System ist sehr praktisch. Die Klemmhalterungen für Skadis habe ich mit schwarzem Rest- PLA gedruckt... , ist ja nicht zu sehen 😉.
1
Reply
Print Profile
5, 6A. 6B - Pull-Out Bins - 0.2mm layer, 2 walls, 15% infill
print and construction are pretty great.
1
Reply
Print Profile
3, 4A, 4B - Drawers - 0.2mm layer, 2 walls, 15% infill
0
Reply
Excuse my ignorance, where can I find the universal mount?
The designer has replied
0
Reply
it's on all the printing plates, otherwise it should also be in the Raw files section. if it isn't I'll update it tomorrow
1
Reply
Replying to @CDoucet :
Got it, thanks.
0
Reply
Print Profile
5, 6A. 6B - Pull-Out Bins - 0.2mm layer, 2 walls, 15% infill
The Wall Mount slide-in Thing schould be rotated. But all in all is it a nice work and I love it to organise my stuff in this.
The designer has replied
0
Reply
I'm not sure I understand what you mean by rotating the universal mount?
0
Reply
Print Profile
3, 4A, 4B - Drawers - 0.2mm layer, 2 walls, 15% infill
Clean but a bit quick to fall off when removing from the base. Good storage size.
0
Reply
Print Profile
3, 4A, 4B - Drawers - 0.2mm layer, 2 walls, 15% infill
Top - passgenau und genial designed
0
Reply
Print Profile
3, 4A, 4B - Drawers - 0.2mm layer, 2 walls, 15% infill
Nice
0
Reply
Print Profile
3, 4A, 4B - Drawers - 0.2mm layer, 2 walls, 15% infill
1
Reply