Spin top pill holder/stash box. Small functional toy to fidget with. I broke this model down into several pieces for multi color printing fun. to limit filament changes, print top and bottom on separate plates. 2 bottoms included 1 fully printed and 1 with insert hole. Bottom with insert hole is designed for 3/32" tungsten electrode cut and sharpened to a semi point to increase durability. Use (most preferred) JB weld quick set, Quick set 2-part epoxy, or (least preffered) superglue to retain insert.) Counter sunk hole (included in both bottom designs) will receive up to 3 US dimes for increased bottom weight and lowering center of gravity (recommended to use adhesive to set the coins). The printed model runs exceptionally well without any additions. I was just having too much fun to not try to perfect this design. 3MF has preferred support and print settings. I used PLA + for print longevity I recommend using print orientation and support settings in 3MF basic PLA could be sped up. Thanks for checking it out.