Reuter_Corp

cover

hex tree2 bild_51cac09e-31eb-418d-b190-80859f83c36f.jpg

IMG_6892_cca7028f-3884-4544-b1f9-8e34049347d6.jpeg

IMG_6581_b4e435dc-c199-48f8-b7c3-0dd7dc23f5d0.jpeg

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

plate_6.png

plate_7.png

plate_8.png

plate_9.png

plate_10.png

plate_11.png

plate_12.png

plate_13.png

plate_14.png

IMG_8776.webp

hex tree2 bild_131aa523-d68f-4f1a-a534-580685e6280b.webp

0.2mm layer, 2 walls, 15% infill

Maguzzi

IMG_7176.JPG

IMG_7179.jpg

IMG_7172.JPG

Alignment tool. Width of “arms” 5.8mm so 0.083mm wider than the frames in original model, height 6mm since I printed tree pieces as 5mm height. Scale Z up or down if needed. Fillets and chamfers in corners so small bumbs in tree pieces corners doesn&#39;t affect alignment. Use two or three of these tools to make your life even easier.

Alignment tool, 0.24mm layer

BigBadBrew

PXL_20240403_234218707_a8a1b4d6-d8df-40d4-8d53-8b0a8e67d736.webp

plate_1.webp

plate_10.webp

plate_11.webp

plate_12.webp

plate_13.webp

plate_14.webp

plate_2.webp

plate_3.webp

plate_4.webp

plate_5.webp

plate_6.webp

plate_7.webp

plate_8.webp

plate_9.webp

Same print but with inset nail holes on each side. Nails are roughly 1mm thick with 3mm flat heads. They hold very well into drywall for the purpose of staying in place.

With Nail Holes, 0.2mm layer, 2 walls, 15% infill

meuch13

IMG_4663_ad4562c9-6e76-45df-be06-64deda20cc24.webp

Reduced size to 75% of the original to fit A1 mini plate:<ul><li>0.2mm layer</li><li>2 walls</li><li>15% infill</li><li>support A1 mini</li></ul>

0.2mm layer, 2 walls, 15% infill, 75% size for A1 mini

Hexagonal Tree

<h2>Wall Art - Hex Tree 3</h2>14 pieces 7mm thicksize can be adjust in Bambu studiochoose the thickness you want. thanks hope you like ithappy printingsee you next one

Wall Art - Tree 

ASIA

Print Profile(4)

Description

Wall Art - Hex Tree 3

Comment & Rating (88)

This remix is based on

License

Related Models