This one is a 2-part project:
you have the main sign,
and you have the blue ring around the Esso logo seperatly
(it didn't fit in with the coloring in HueForge)
Just a drop of glue and it's ready!
Make sure the dimension of the ring is on 93.93% scale!
Main Sign:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4.8
PLA BambuLab Basic Orange Transmission Distance: 4.8
PLA BambuLab Basic Yellow Transmission Distance: 4
PLA eSUN White Transmission Distance: 1.6
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #17 (1.44mm) swap to Orange
At layer #19 (1.6mm) swap to Yellow
At layer #24 (2mm) swap to White for the rest.
Blue ring:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Blue Transmission Distance: 4.8
Swap Instructions:
Start with Blue
All the designs i upload, i have to print first, and that's a lot of filament 😬 And filament isn't free..
So, if you like my work you could
buy me a coffee if you like. 😉
https://www.buymeacoffee.com/a.vdh_83
Or a donation via Paypal is also much appreciated.
https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL