This is a filament painting of bigfoot standing in a lake. It was made by using Midjourney. Printed at 200x200 @ 3.12mm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PrintBed Black

Printbed White

PrintBed Gray

Overture Orange

PrintBed Midnight Blue

ProtoPasta Partly Sunny Yellow

Swap Instructions:

Black until layer #8 at 0.72mm

Dark Blue until layer #14 at 1.2mm

Gray until layer #17 at 1.44mm

Orange until layer #24 at 2mm

Pure Yellow until layer #27 at 2.24mm

White for the rest.