This is a filament painting of a female samurai. It was made by using Midjourney. Printed at 133x200 @ 3.04mm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PrintBed Black

Printbed White

PrintBed Red

PrintBed Orange

ProtoPasta Partly Sunny Yellow

PrintBed Chocolate

PrintBed Grey

Polymaker Muted Blue

Swap Instructions:

Black until layer #7 at 0.64mm

Brown until layer #8 at 0.72mm

Grey until layer #9 at 0.8mm

Blue until layer #11 at 0.96mm

Red until layer #18 at 1.52mm

Pure Yellow until layer #23 at 1.92mm

Orange until layer #28 at 2.32mm

White for the rest.