The HueForge multiverse is a concept about which we know frighteningly little.
But with each layer, each filament, we shape a new reality.
We are the architects of possibilities, folding and extruding the fabric of creation.

I am a huge fan of Doctor Strange (Benedict Cumberbatch) so I've tried out the new HueForge 0.7 mode “color pop”. After some back and forth and a somewhat ok but not great first version there was a second one and finally … this 3rd version. So: please enjoy!

If you are using the one-click 3MF file on Makerworld (aka the “print profile” in the top right), all appropriate settings have been applied to the print (PLA filaments)!
Slice it, print it, done.


If you are not using the one-click printing method, or are not using a Bambu printer, read on:

Print Instructions (manual settings):

1. print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filament Swaps (4 colors, but more swaps than usual because of the new “color pop mode”):

• Start with Black
• At layer #5 (0.48mm) swap to Beige
• At layer #13 (1.12mm) swap to White
• At layer #17 (1.44mm) swap to Black
• At layer #19 (1.6mm) swap to Burnt Titanium
• At layer #25 (2.08mm) swap to Beige
• At layer #28 (2.32mm) swap to White for the rest
  

Filaments I've used:

• Nebula Purple: Flashforge PLA “Nebula Purple”*
• Beige: Bambu Lab PLA Basic “Beige”
• Black: Extrudr PLA NX2 matt schwarz*
• White: Extrudr PLA NX2 matt weiß*

Notes:

• *The used link is a so-called affiliate one. When you buy a product using this link, I will receive a small provision. The price itself does not change. Thanks so much for your support :)
• I am not affiliated with Marvel or Disney or any other license holder nor is this print an official release. It's just a fan and hobby project made at home and should not condone theft of copyrighted material and I don't want to get into even the slightest trouble because of that.