LIGHT BOX for the new Ferrari SF-24 of F1-World championship 24/25.

Used materials:

-Led strips 5v WHITE (Amazon or Aliexpress)

-Magnet 6x2,5mm (DiameterxThickness) (Amazon or Aliexpress)

-USB cable with On/Off button (Amazon or Aliexpress)

-Weldering (Amazon or Aliexpress)

-Superglue for PLA (Amazon or Aliexpress)

STEPS:

1.After printing welder the USB cable to Led strips, make attention to positive and negative.

2.Glue the Led strips to the vertical wall of the lamp and insert the superglue on the holes and the insert the magnets with the same polarity.

4.Insert the superglue into the 4 holes located on the 6.2 mm corners of the cvoer and then insert the magnets, making sure that they have the same polarity and that it is opposite to that of the magnets of the lamp, for attraction-