说明：

这是一个适用于儿童的迷你款摇摇椅，需要注意的是该摇椅需要拼接并采用胶水固定。拼接精度要求较高，整体组合尺寸较大需严格控制变形，零件的拼接面应当朝上。因组合边缘存在相对锋利的毛刺，组合完成后需要采用砂纸适当打磨，最好配置上毛毯软垫提高舒适性。成品整体边缘柔和适合给儿童使用，最好贴上绒布提高舒适度。摇椅结构很稳定，不倒翁结构重心很低，儿童攀爬不会轻易侧翻或倒下。成年人坐上去或者站上去不会有任何损坏问题，但尺寸很迷你不一定能坐下去。模型不需要任何额外的附件，打印一次成型。在X1，P1，A1系列打印机上都能很好的实现。若需要在A1mini等小尺寸机型上打印，需适当缩放大小。

本模型适用材质宜采用PETG或ABS，若对质量有较高要求，也可在受力零件上采用PETGCF,或PACF材质。长期使用不建议采用PLA材质，环保塑料存在脆性断裂的隐患。

五金件清单：

不锈钢圆柱销：φ5*40mm

数量：12根

胶水： ergo 1918-1

数量：2瓶

description：

This is a mini rocking chair for children, it should be noted that the rocking chair needs to be spliced and fixed with glue. The splicing accuracy is required to be high, the overall combination size is large, and the deformation needs to be strictly controlled, and the splicing surface of the parts should be facing up. Due to the relatively sharp burrs on the edge of the combination, it is necessary to use sandpaper to properly polish after the combination is completed, and it is best to configure a blanket cushion to improve comfort. The finished product has soft edges and is suitable for children, and it is best to apply flannel cloth for comfort. The rocking chair structure is very stable, and the tumbler structure has a low center of gravity, so children will not easily roll over or fall over when climbing. Adults will not have any damage when they sit on or stand on it, but they may not be able to sit down if they are very small. The model does not require any additional attachments, and it is printed and molded once. It can be well implemented on X1, P1, and A1 series printers. If you want to print on a small size model such as the A1mini, you need to scale the size appropriately.

The applicable material of this model should be PETG or ABS, if there is a higher requirement for quality, PETGCF or PACF material can also be used on the stressed parts. It is not recommended to use PLA material for long-term use, and environmentally friendly plastics have the hidden danger of brittle fracture.

Hardware list:

Stainless steel cylindrical pin: φ5*40mm

Quantity: 12

Glue: ergo 1918-1

Quantity: 2 bottles