X1C P1S分体硅胶擦嘴器 SILICON NOZZLE WIPER FOR X1CC P1SC by EricYC

EricYC

3D Printer>3D Printer Accessories

GIF

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

Multi color printing with logo 双色打印含拓竹Logo

Designer

1.5 h

2 plates

5.0(10)

No logo version 无logo版本

Designer

1.2 h

2 plates

5.0(1)

精简模型和参数，便于快速打印，修复尾部上翘，

28 min

1 plate

Open in Bambu Studio

Boost

166

Released

Description

X1CC P1SC分体硅胶擦嘴器，可随时替换因磨损或热变形导致损坏的刷头，需要两个M3X10沉头螺丝，将按尺寸切好的硅胶条（15mm-16mm）通过速干胶水粘在方孔内，再用M3X10的沉头螺丝固定在主体上，无需支撑，用PETG-CF或ABS-CF也可以获得很好的效果。

假如您想要单色打印，无需logo，请下载或直接打开第二个配置，第二个配置已删除logo，主体更简洁，打印更快速

假如你不喜欢用胶水固定硅胶条，你也可以选择另一种硅胶固定器。它通过从侧面滑入硅胶条来固定硅胶条，使其更容易调整。链接：Extremely Tight Alternative Part for EricYC‘s SILICON NOZZLE WIPER(分体硅胶擦嘴器) 来自 qiqiji - MakerWorld

下面是硅胶条的购买链接

https://detail.tmall.com/item.htm?_u=h7au44lbb5e&id=554269682402&spm=a1z09.2.0.0.7f1b2e8dVvhmiR&skuId=4962245431132

X1CC P1SC split silicone lip wiper, which can replace the worn or thermally deformed brush head at any time, requires two M3X10 countersunk screws. The silicone strip (15mm-16mm) cut according to the size is glued in the square hole with quick-drying glue, and then fixed on the main body with M3X10 countersunk screws. It does not require support, and good results can also be obtained with PETG-CF or ABS-CF.

If you prefer a version with no logo and monochrome printing, please select the second configuration.The second configuration has removed the logo, making it more concise and faster to print.

If you don't like using glue to fix silicone strips, you can also opt for another version of the silicone fixator. It fixes the silicone strip by sliding it in from the side, making it easier to adjust. The link is below：Extremely Tight Alternative Part for EricYC‘s SILICON NOZZLE WIPER(分体硅胶擦嘴器) 来自 qiqiji - MakerWorld

nozzle

wiper

Comment & Rating (17)

@hktsenga

Print Profile

Multi color printing with logo 双色打印含拓竹Logo

我印了PETG 與ABS,可以看到ABS有些變形，我也不知道發生啥事情，目前先用PETG來使用，等待我的膠條到來！這可以更換的似乎比較好！

The designer has replied

@EricYC

PETG打印的很好

@hktsenga

Replying to @EricYC :

同意打印出來很讚，感謝你！

@EricYC

Replying to @hktsenga :

太客气了感谢捧场

@andoreen

Print Profile

Multi color printing with logo 双色打印含拓竹Logo

Passt perfekt. Vielen Dank! When cleaning, the back part lifts off slightly. Can you design an addition and add a bridge on the left side?

(Edited)

The designer has replied

@EricYC

Thank you very much for your understanding and support. Regarding the issue of the main body arching, as you mentioned, it is usually caused by the silicone strip being cut too long. When the silicone strip is too long, the nozzle exerts a downward force on the silicone strip during repeated wiping, causing the main body to arch. To solve this problem, it is crucial to ensure that the silicone strip is of the appropriate length. When the silicone strip is of the right length, the arching of the main body will be greatly improved under normal working conditions, and this issue may even disappear completely. Therefore, I suggest that you try cutting the silicone strip slightly shorter, which can reduce the downward force exerted by the nozzle on the silicone strip during wiping. At the same time, to achieve more accurate cutting of the silicone strip, you can try using the cutting model I recommended. This cutting model has been carefully designed to help you more accurately control the cutting length and ensure that the silicone strip meets the required length.

@kunday

Print Profile

No logo version 无logo版本

Works good for now. Started using petg so nozzle was never left completely clean. Hoping this does the trick.....

@sergiorlg2

Print Profile

Multi color printing with logo 双色打印含拓竹Logo

@Rayven

Print Profile

Multi color printing with logo 双色打印含拓竹Logo

I am not using the cleaner as the default one is currently working just fine for me, but the other Part ist great :) Edit: I did print out the bracket but not thr small extension for the cleaner.

(Edited)

The designer has replied

@EricYC

Thank you very much for your five-star rating. Although you didn't print it out, your support still means a lot to me.