Windmill / Windmill

This windmill serves as a decorative garden stake and is made of 3D Printed parts. To assemble it, in addition to the printed parts, you will also need a wooden rod with a diameter of 12 mm and an M3 metric screw for attachment. A total of 7 blades need to be printed, which are fitted onto the center with a gear. The gear presses both parts of the blade together and allows for their proper attachment.

Next, screw the axle into the block that connects the wooden rod to the windmill's axle. Slide a spacer onto the axle, then the assembled windmill, and finally secure the axle with an end cap. It is important not to tighten the axle completely – the windmill must rotate smoothly.

This simple mechanism ensures the smooth movement of the windmill, which will beautifully liven up your garden or flower bed.