I'm going to do a series of Cat's in classic dungeons and dragon's roles. This is the first of the series, a cat wizard exploring a cave and encounting a giant bee.

When I create the others I will add theme to this fantasy themed collection here:
https://makerworld.com/en/u/4065522623/collections/624430

I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display.

Final Size is 200x200mm
If you resize the model from 200 x 200 make sure you do NOT scale the Z axis or the print colours will not be in the same position

Please post a picture of your printed copy! I'd love to see it!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Dark Brown
At layer #17 (1.44mm) swap to Yellow
At layer #22 (1.84mm) swap to Jade White for the rest.