Counter Cleaner
Print Profile(4)
![[A1 mini optimized] 0.2mm layer, 4 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US945c78cdf21354/440653592/instance/2024-07-06_a2fa1b282e4f7.webp?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
Bill of Materials
Description
This Counter Cleaner helps you to easily, quickly and thoroughly clean things off your kitchen counter / dining table / office desk. Just place it against the counter or table, sweep everything into it and you're done!
If you would like to mount the Counter Cleaner to a wall or the door of a kitchen cabinet for easy accessibility, check out the corresponding holder.
If you're having trouble with the model sticking to the bed while printing, make sure your build plate is clean. Wash it thoroughly with hot water and a high-quality dish soap. Avoid touching the build plate with your bare fingers, as bodily oils will act as a seperation layer between the print and the plate. You can also enable brims in your print settings to improve adhesion, but usually, the model can be printed without them as long as the print bed is clean. Please don't give this model a bad rating just because you do not have a clean build plate, as this is outside of my control.
The model in the pictures was printed in Bambu Lab PLA Matte Desert Tan.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (522)