Bull The Scream Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #10 (0.88mm) swap to Orange
At layer #15 (1.28mm) swap to Yellow
At layer #17 (1.44mm) swap to Jade White for the rest.