TinyS3 USB-Stick (ESP32-S3)
Copyright Claim
TinyS3 USB-Stick (ESP32-S3)
Boost
2
2
0
Print Profile(1)
0.1mm layer, 2 walls, 15% infill
Designer
48 min
1 plate
Boost
2
2
0
0
0
0
Released
Description
A small case to convert a TinyS3 to a USB-Stick.
Handy for all kinds of home automation, eg. as Nuki Hub.
BOM:
Part sources are just examples…
| QTY | Part | Source |
|---|---|---|
| 1 | TinyS3 | TinyS3 |
| 1 | USB-C gender changer (male to male) | Amazon |
| 4 | M3 x 3mm heat set inserts | CNC-Kitchen |
| 4 | M3 x 8mm low profile socket head screws | CNC-Kitchen |
Print Recommendations:
Tolerances are tight, so make sure your printer is dialed in.
- Material: PLA
- Layer height: 0.10 mm
- Infill: 15% Gyroid
- Wall loops: 2
- Wall generator: Arachne
- Supports: Tree (manual), counterbores only
Assembly:
- Use a hex key to push out the counterbore supports from the top
- Apply the heat set inserts. Be careful to not break off the legs pushing down on the PCB, they are fragile
- Insert TinyS3 and USB-C gender changer
- Assemble top and bottom
Comment & Rating (0)
All
No more
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld