hello kitty
Print Profile(1)
Description
Print with 100% infill with a 0.08mm layer height and a 0.16mm base layer
The model is 200 x 200 mm
You can print with layer heights above or below the 0.48mm minimum depth
The maximum depth is 2.2mm and the actual depth is 2.3mm
Filaments used:
PLA PolyLite Black: Transmission distance: 0.3
Bambulab PLA Basic Red: Transmission distance: 4
Bambulab PLA Basic Yellow: Transmission distance: 6
Bambulab PLA Basic Jade White: Transmission distance: 5
This print uses 4 unique filaments
Replacement instructions:
Start with black
At layer #8 (0.72mm), replace with red
At layer #16 (1.36mm), replace with yellow
At layer #21 (1.76mm), replace with jade white for the rest
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)