【筋斗云】羽毛笔(Quill Pen)

Copyright Claim

【筋斗云】羽毛笔(Quill Pen)

Boost
11
12
12

Print Profile(2)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

【天瑞PETG-ECO】A1mini-0.2mm layer, 2 walls, 15% infill
【天瑞PETG-ECO】A1mini-0.2mm layer, 2 walls, 15% infill
Designer
3 h
1 plate

【bambu PETG-半透明(translucent)】A1mini-0.2mm layer, 6 walls, 25% infill
【bambu PETG-半透明(translucent)】A1mini-0.2mm layer, 6 walls, 25% infill
Designer
2.4 h
1 plate

Boost
11
12
12
0
29
1
Released

Description

更新2024-0221-可能有人需要独立的笔套,而不是底座所以上传了单独的笔套,并实测没问题,特殊需要可以单独从原始文件下载

(Update 2024-0221: Some people may need a standalone pen case instead of a base, so a separate pen case has been uploaded. It has been tested and works fine. If there are special needs, it can be downloaded separately from the original file.)

 

前几天突发奇想,想到哈利波特电影里的羽毛笔写字场景,觉得说不定可以设计一款3D打印版本的羽毛笔,于是花了一点时间动手设计了一款,为了控制3D打印的笔杆直径,我选择了纤细的圆珠笔芯(直径3mm,最大外尺寸144mm)(购买链接),经过多次设计修改+打印验证,最终获得了稳定的打印效果,组装也非常简单,从底部直接塞到底就行,我使用了两种耗材材料,一种是天瑞PETG-ECO;另一种是bambu的PETG-半透明耗材,由于两种品牌耗材打印温度和风速差异比较大, 所以提供了两种打印配置。(PS:实测多次发现使用Bambu Studio切片,打印质量-墙生成器:经典效果要明显优于Arachne,因为有些人会使用OrcaSlicer切片,它默认是Arachne模式所以提醒下)

 

A few days ago, I had a sudden inspiration when I thought of the scene in the Harry Potter movies where they write with a quill pen. I thought maybe I could design a 3D printed version of a quill pen. So, I spent some time designing one. To control the diameter of the pen shaft for 3D printing, I chose a slender ballpoint pen core (diameter 3mm, maximum outer dimension 144mm). After multiple design modifications and printing validations, I finally achieved a stable printing effect. Assembly is also very simple; you just need to insert it directly from the bottom. I used two types of consumable materials: Tianrui PETG-ECO and Bambu's PETG semi-transparent consumable. Since there is a significant difference in printing temperature and wind speed between the two brands of consumables, I provided two printing configurations. (PS: After testing multiple times, I found that using Bambu Studio for slicing, the printing quality-wall generator: classic effect is significantly better than Arachne. Some people may use OrcaSlicer for slicing, which defaults to Arachne mode, so I would like to remind you.)

最后如果你有渐变色耗材,或许可以打印出更出色羽毛笔,哈哈

If you have gradient-colored filaments, you might be able to print an even more outstanding quill pen, haha.

 

Comment & Rating (12)

Please fill in your opinion
(0/5000)

能单独出个笔帽款吗
The designer has replied
0
Reply
你是需要笔帽文件吗?可以从原文件直接下载
0
Reply
Replying to @user_68898811 :
你上传一下
0
Reply
Replying to @user_68898811 :
你那个缝隙怎么隐藏的怎么设置
0
Reply
No more