Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Sapphire Blue Transmission Distance: 0.3
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA PolyTerra Cotton White Transmission Distance: 2.5
Swap Instructions:
Start with Charcoal Black
At layer #5 (0.48mm) swap to Sapphire Blue
At layer #12 (1.04mm) swap to Savannah Yellow
At layer #21 (1.76mm) swap to Cotton White for the rest.
Buona stampa a tutti 🚀🚀🚀🚀🚀