Search models, users, collections, and posts
Cleaning Scraper
IP Report
Print Profile(1)
0.12mm layer, 3 walls, 50% infill
Designer
2.1 h
1 plate
Open in Bambu Studio
Boost
5
4
0
0
16
4
Released
Description
Boost Me (for free)
Thank you for your consistent support. Your support is my motivation!
Cleaning Scraper
Blade Size: 100x18mm
Scraper Size: 110mm wide, 150mm long
All parts except for the blade are printed using PETG.
After inserting the blade, slide in the cover, pinch the cover and base, align the holes, insert both limiters into the bottom, and lock the blade and entire scraper in place.
Install the mask with the text facing up.
I recommend printing with PETG at a layer height of 0.1mm and 50% infill.
The limiters and mask should be laid flat, and note that there is a flat surface for them to rest on.
No supports are needed.
Membership
Interested in using this for commercial purposes? Join my membership!
Join
License
If you want to use this model commercially, please join my membership.
Join Now
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)