MTG Linkage Lid Deck Box - Double with Dice Compartment (print in place) by BlueBeka

BlueBeka

Toys & Games>Other Toys & Games

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

70+ v1

Designer

6.5 h

1 plate

5.0(1)

80+ v1

Designer

6.7 h

1 plate

5.0(1)

100+ v1

Designer

7.3 h

1 plate

5.0(1)

60+ v1

Designer

6.2 h

1 plate

2.0(1)

Click to see more

Boost

Released

Description

A double deck box with dice compartment; available in various sizes. Let me know if you need a different size and I can add it.

The number refers to the number of double sleeved cards that will fit. If you want the single sleeve count, multiply that number by 1.25. (The 80+ will fit a single sleeved commander deck).

Dice Box is available here.

Print Settings

The model is designed to be printed with 0.4mm nozzle, 0.2mm layer height and no supports.
I recommend to printing with 2-3 walls and 15%+ infill for good strength. It's also best to use a brim to help the lid adhere to the bed.
The arms should probably be printed with even more walls (5+) and infill (50%+) for better longevity.

Comment & Rating (8)

@king0fheartsx14

Print Profile

60+ v1

Second attempt partially succeeded after turning speed to 50% half way through. First attempt at full speed knocked the plate off the bed. Second print still had the issue of the plate getting knocked. Zero issues with the dice box. Really like the design but the A1-mini does not.

(Edited)

The designer has replied

@BlueBeka

I've only printed the boxes on the x1c. I've never used the a1 so the profiles probably aren't appropriate for it. Feel free to upload a working print profile for the a1.

@samuel.joost

Replying to @BlueBeka :

Had the same problem with the 110+ on my P1S but less prominent. Will try printing slower...

(Edited)

@samuel.joost

Replying to @samuel.joost :

So, i tried again. Textured PEI plate with glue, 25% slower print speeds. The lid fell over, ripped the brim clean from the plate... Germany isn't known for earthquakes and the two previous prints just had slight shifts like king0fheartsx14 Edit: Just checked, used the textured, not the smooth plate, so i understand the loss of adhesion even less...

(Edited)