Pikachu Clock

If you wish to offer me a small coffee

For commercial licenses, you can go to my Patreon

Read the descriptions before printing a model, important information is found there!

✅ Printed in PLA

✅ Freely color this pretty little clock as you wish, featuring Pikachu
✅ Compatible with all clock mechanisms with an 8mm shaft diameter, consider a model with a hook!

✅ Works with Kit 011 but you need to add a hook

✅ Print face up against the build plate to get a nice finish depending on your PEI

✅ Dimensions on the build plate: 220 x 220 x 3mm

✅ You can find the hands here https://makerworld.com/en/models/2009767-various-clock-hands-70-100-mm#profileId-2164852

✅ Other clocks are available in my profile =)

✅ Very nice decoration that could join a child's room who loves Pokémons

✅ A desk or furniture or shelf stand is available here if you don't want to hang it on the wall https://makerworld.com/en/models/2458679-clock-stand#profileId-2699554

✅ The clocks I publish are not compatible with the A1 Mini but… you can resize them to x=170 y=170 z=3mm to make them compatible with the A1 Mini

      Beware of the negative cylinder! It must remain centered and have a diameter of 8mm, do not change its diameter!

✅ You will find here a stand to place the clocks I publish on a desk, furniture, or shelf… if you don’t want to hang them on the wall

✅ You will find here a stand compatible with clocks resized to x=170 y=170 z=3mm

✅ You will find here the hands

✅ You will find here hooks for clock mechanisms