Filionix3D

dsloke

which are the two silvery/gray filaments?

martenh

very impressive design thanks for the tip for printing at .12LH screws turned out perfect 

jbravo88

love the choice of colour, looks awesome 

litlclutch

I love this design! A little bit of struggle with the bolts, but it worked at the end!

Zirkevin

Thank you for reporting. I have now corrected the files!!

Printed very well, Just make sure the hardware is printed a .16 or finer. Also the second to largest bolt was just shy of being long enough for the "yen yang" shoulder parts to work so I had to omit them.

Printed in 3 colors.


geekm0nkey

very nice model. only thing is the bolts are very difficult to screw in, had to glue almost all of them.
printed in Creality CR-PLA Silk dual colour

michaelAngelo

all-in-one, two colors, 0.16mm layer, 2 walls, 15% infill, w/brim on bolts

not easy to assemble but doable. I wish there was thicker nuts to catch the bolts better. 4.5/5

Getzmr22

Beautiful design! I originally printed everything at .16, but had a few issues with the threads on the nuts. I reprinted them at .12 and they were perfect. 

Kryptonite0106

user_1867257564

user_3084342341

thank you very much! my first piece by A1 mini. 

Vivian

KABRUM_info

cover

untitled.72_e5683e21-f38e-48c9-babd-2f9b812ff2d6.jpg

untitled.71_ecddbe4e-d34b-490a-b373-97392f763c79.jpg

large_display_foto5003_4fa8e6ae-2893-4ce5-b706-aa0c02addc15.jpg

large_display_foto5001_2d7c8641-c5e6-43f9-8139-31a9c9c50aea.png

large_display_foto5004_df73543c-5719-46d7-938a-c503b16e939d.png

Guideuno_5242b188-9b6c-4dc4-ac80-042923a9c0dd.jpg

Guidedue_02e3ef50-8f63-4388-998c-5aceabe408c0.jpg

Guidetre_3b0c89eb-767e-4641-a6c7-12f5fcc3ca33.jpg

Guidequattro_44928011-60d2-46b9-bd06-ec05e96ee185.jpg

Guidecin_2fc3a8cd-889c-4bcd-a6c9-dfd0de197b71.jpg

large_display_foto5003_9b18ddd4-a150-4618-a953-819144428fc1.webp

plate_1.png

Body_bolts_0.16mm layer, 2 walls, 15% infill

large_display_foto5004_26b5ed2c-d3c7-4f22-8306-886d0ef8fb0b.webp

Wings_0.16mm layer, 2 walls, 15% infill

large_display_foto5001_9faf18cf-584d-4553-9e93-143f5ebf0c84.webp

Base_0.16mm layer, 2 walls, 15% infill

large_display_foto5001_c0c636d0-4c06-4bf8-a779-3d2bf6fc29c3.webp

Base_0.12mm layer, 2 walls, 15% infill

large_display_foto5003_4b163c4b-5579-4ff1-bea1-47de9bd66476.webp

Boby_Bolts_0.12mm layer, 2 walls, 15% infill

large_display_foto5004_1493b12e-ffc1-4cc7-833a-b7a2e0fb4173.webp

Wings_0.12mm layer, 2 walls, 15% infill

dragoooon_62401a6f-dd2f-464d-b33e-4246564a1ca0.webp

plate_1.webp

plate_2.webp

plate_3.webp

plate_4.webp

plate_2.png

plate_3.png

plate_4.png

<ul><li>All pieces on one file.</li><li>Brim on bolts for better adhesion.</li><li>Two colors version, no AMS.</li></ul>

PXL_20240224_120923827_7587eee8-22d9-4af0-8d82-e592fffe2cf8.webp

PXL_20240224_120900983_82fb0dc7-8f72-47c5-a0af-b0a96a8ef16f.webp

Color 1

Color 2

Color 3

Base

usr_29A

One file with plates organized by color. More customization is possible if you wish different color groupings. Topmost surfaces are ironed.&nbsp;Left/right parts are mirrored so you can put build-plate sides all on the inside/outside. This is especially helpful with the textured PEI build plate. (Most mirrored parts are interchangeable, but you might prefer to mirror each back leg again.)&nbsp;If you want the base to be the same color as another plate, then move it there and change the filament to match. If you want to de-emphasize the bolts, them move them to color 1, same as the little accent pieces and the tail.&nbsp;Assembly Tips:* This model is a tight fit! I had to reprint one of the bolts that I tore, and I had to use a knife to scrape out the inside of the holes on some pieces because that filament expands very slightly differently than the generic settings in my slicer.* One of the provided drivers can help push pieces onto the bolts, by starting to thread the piece, putting the bolt on a table with the threads up, then using the driver to push the piece down.* Try threading the nuts onto the bolts by hand, loose, before you try attaching pieces.* First, try one driver on the bolt and thread the nut by hand. Once it's started, use the other driver on the nut. If you have an adjustable wrench to use on the nut instead, that worked better for me.* Use a very light touch with a heat gun to bend the wings.&nbsp;&nbsp;

Organized by color, select parts mirrored, 0.12mm layer

IMG_2391_c5198038-5865-4e9e-ab11-00bce3932d1c.webp

plate_5.png

Lucas

Included all parts in one profile and split some groups into parts to fit them on the A1 mini bed.

all-in-one - 0.2mm layer, 2 walls, 15% infill

2024-02-24_687085929fe978_96ce3309-48ed-4792-afb0-feb97007485a.webp

2024-02-24_6af0d07ec4b6b8_26a58f38-c18f-418e-aed0-7f700a70fbab.webp

Organized by color, select parts mirrored, 0.16mm layer

Take shape of your dragon by moving each joint and create your magical creature. Make sure to have a well-calibrated printer for better accuracy. Enjoy discovering the magic of dragons with this unique puzzle!Note: Make sure to print everything at a resolution between 0.16 / 0.12&nbsp;Feel free to print Arachna the robot spider, discover it on my profile: <a target="_blank" href="https://makerworld.com/en/@Filionix3D" rel="nofollow noopener">https://makerworld.com/en/@Filionix3D</a>

Robot Dragon Articulated Puzzle

Global

Print Profile(10)

Description

Comment & Rating (124)

License

Related Models

Articulated Mini Baby Dragon

Articulated Stone Dragon by Saber3D

Articulated Baby Dragon

Rose Dragon articulated - Large