Cake Piping Tip
Copyright Claim
Cake Piping Tip
Boost
10
12
4
Print Profile(2)
0.2mm layer, 2 walls, 15% infill, all nozzles
Designer
27 min
1 plate
All Bambu Printers - 0.2mm layer, 2 walls, 15% infill
36 min
1 plate
Open in Bambu Studio
Boost
10
12
4
1
30
38
Released
Description
I was able to successfully print this on a Bambu Lab P1S at 100% speed.
The wall thickness of the model is 1.2mm. For printing, I used a 0.4mm nozzle and PLA filament.
It happened to me once that the model detached from the plate during printing due to the small contact surface. Therefore, it is worth considering using glue, but it is not necessary.
Comment & Rating (4)
All
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill, all nozzles
Has the right amount of strength for piping, it doesn't lose shape either!
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, all nozzles
Perfekt! Vielen Dank!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill, all nozzles
0
Reply
Print Profile
All Bambu Printers - 0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Share AlikeRelated Models
© 2024 MakerWorld