St Louis Blues - Stylized Team Logo

The rest of my NHL team logos can be found in this collection here:
https://makerworld.com/en/u/4065522623/collections/549654

I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display.

Final Size is 200x200mm
If you resize the model from 200 x 200 make sure you do NOT scale the Z axis or the print colours will not be in the same position

Please post a picture of your printed copy! I'd love to see it!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA Bambu Basic Gold Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Dark Blue
At layer #13 (1.12mm) swap to Marine Blue
At layer #16 (1.36mm) swap to Gold
At layer #23 (1.92mm) swap to Jade White for the rest.